Christmas Orders - Order before 11th of November 2024

Pelmet Selection

Looking to buy Pelmets Online? Get INSTANT PRICES BELOW!

$0.00
Maximum quantity available reached.

 

Important Notes:

  • Please read the advice for Choosing the right pelmet.
  • If you are experiencing difficulty ordering product, please view our How to order pelmet from our selection page.
  • We provide fabric information on the samples page, you can filter colours, fabrics, cost.Simply click on selected fabric thumbnail you would like to view.All Fabric Technical Specification can be viewed here.
  • Please watch and read our measurement guides and pelmet installation guides.
  • Please note double rollers blinds can impede standard door heights.You may require to install double rollers above architrave for adequate head clearance. You will require around 160mm from top of door opening on roller blind drop.
  • Colour variances may occur between fabric production batches. These variances are within industry tolerances.
  • Colours will appear different on different computer monitors and are a guide only when deciding your selected purchase.
  • All Blinds ordered must comply with ACCC child safety guidelines. Read ACCC guidelines carefully.You may wish to view our installation video to assist with the ACCC.safety Guidelines.
  • Pelmets are not included in Roller Blind pricing and can be purchased separately on our Pelmet page. Some images on our website may display Pelmets for visual references only.
  • When selecting fabrics please note, only blockout fabrics can be chosen for bonded pelmets. We cannot provide bonded pelmets withs this fabric ranges; Duo Block Blockout, Icon FR Blockout, Vibe Blockout, Vibe Metallic Blockout.
  • Please note our roller blinds and pelmets are for indoor purposes only.
  • Please note,Recess pelmets may require you to make onsite adjustments. We recommend you deduct around 2mm from your OBM for easier fitting. 
  • Bonded Pelmets are made up of MDF (timber) boxes that are glued and wrapped with a fabric.Maximum size Warranted is 3500mm long. The maximum single piece length is 4800mm. All pelmets exceeding this size will be made in two equal halves. If Pelmet is wider than the fabric width, the fabric will be wing joined with a centre panel, otherwise you need to specify if you would like it railroaded.
  • Please note; Screws are not supplied for blind or pelmet fixings.
  • Retro fit Sunboss fascia's with non Sunboss fittings. For recess fit you will require approximately 18mm or greater clearance between blind and reveal, or check gap between pin end.This is to allow for Sunboss brackets and covers and your exisiting blind fittings. You might be required to drill through steel brackets. You should add minimum 18mm on for face face fit, you can add 45mm extra to avoid drilling steel brackets completely, you may require toggle bolts for fixing this option. The square Sunboss 75mm and square Sunboss 100mm, has an L that can be drilled straight to the top of recess. You will be required to drill holes and screw in Aluminium to achieve this, no gap would be required for this method. Each retro fit will be different, please contact us if you require further guidance.
  • When opening packaging, please take care of products inside. Products can scratch or tare easily with sharp objects. Keep packaging out of reach of children.
  • Please read our Manufactures Guidelines/Care and Advice.
  • Please read our website terms and conditions and shipping policy.

See What Our Customers Say