ShawSmart™ Motorisation Video Guides
Follow these step-by-step video tutorials to program and operate your ShawSmart motorised blinds.
Important Notes
-
Battery Installation: Ensure batteries are correctly installed in both the motor and remote control before programming.
Make sure the battery terminals are touching the battery. They can sometimes get pressed flat when you change it, preventing a proper connection.
- Programming Mode: Motors must be in programming mode to accept commands. Refer to the specific video for your motor type.
- Limit Setting: Always set upper and lower limits after installation to prevent motor damage and ensure smooth operation.
- Remote Pairing: Each remote can control multiple motors. Follow the pairing sequence carefully to avoid conflicts.
- Factory Reset: If experiencing issues, perform a factory reset and reprogram from scratch. This resolves most programming errors.
- Motor Direction: If your blind operates in reverse, use the motor direction change procedure rather than rewiring.
- Outdoor Motors: Outdoor DC motors have additional features like obstacle detection. Ensure these are configured correctly for your application.
- Support: For technical assistance, contact Blinds Downunder or refer to your ShawSmart product manual.
Need Help?
Our team is here to assist with your ShawSmart motorisation setup and troubleshooting.
Contact Us













